Redox and electrochemistry practice
QCE Chemistry · Original practice questions with worked solutions
Practise oxidation states, half-equations, galvanic cells and electrolysis. Establish whether the cell is spontaneous or externally driven before assigning electrode signs.
Key ideas
- Oxidation is electron loss and occurs at the anode. Reduction is electron gain and occurs at the cathode in both cell types.
- Balance atoms and charge in half-equations, then equalise transferred electrons before combining them.
- Under standard conditions, using tabulated reduction potentials.
Worked example
A common mistake
Anode and cathode refer to the reactions; their signs differ between galvanic and electrolytic cells.
Try these questions
Attempt each question before revealing the worked solution. Saved questions and checked answers also appear in the main bank on this device. Exam marks are recorded after marking a practice exam.
QUESTION 49 (5 marks)
a) Write the two balanced half-equations. [3 marks]
b) Combine them into a balanced net ionic equation. [2 marks]
QUESTION 50 (5 marks)
a) Write the balanced dichromate reduction half-equation. [2 marks]
b) Write the balanced net ionic equation. [2 marks]
c) Identify the oxidising agent. [1 marks]
All redox and electrochemistry practice questions
31 original questions · Page 1 of 2
- Q11 · Original practice · 1 markRedox and electrochemistryWhat is the oxidation state of sulfur in , averaged over the two sulfur atoms?
- Q12 · Original practice · 1 markRedox and electrochemistryA galvanic cell uses zinc and copper half-cells. Which statement is correct?
- Q13 · Original practice · 1 markRedox and electrochemistryThe standard reduction potentials of and are +0.80 V and +0.34 V. The standard cell potential of their spontaneous galvanic cell is
- Q14 · Original practice · 1 markRedox and electrochemistryA molten mixture containing only sodium chloride is electrolysed using inert electrodes. The products are
- Q15 · Original practice · 1 markRedox and electrochemistryWhen a spoon is electroplated with silver, the spoon should be connected to the
- Q16 · Original practice · 1 markRedox and electrochemistryThe same charge is passed through separate and solutions. Assume 100% current efficiency. The mole ratio of deposited silver to deposited copper is
- Q49 · Original practice · 5 marksRedox and electrochemistryIn acidic solution, permanganate oxidises iron(II) to iron(III) and is reduced to manganese(II).
- Q50 · Original practice · 5 marksRedox and electrochemistryAcidified dichromate reacts with iodide to form chromium(III) and iodine.
- Q51 · Original practice · 5 marksRedox and electrochemistryA galvanic cell combines () and () half-cells under standard conditions.
- Q52 · Original practice · 4 marksRedox and electrochemistryThe following standard reduction potentials are provided: , , .
- Q53 · Original practice · 4 marksRedox and electrochemistryAqueous copper(II) sulfate is electrolysed using graphite electrodes. Assume copper is deposited and oxygen evolves.
- Q54 · Original practice · 4 marksRedox and electrochemistryTwo aqueous sodium chloride solutions are electrolysed with inert electrodes. One is concentrated and one is very dilute. Use the syllabus model for preferential discharge.
- Q55 · Original practice · 4 marksRedox and electrochemistryA jewellery workshop plates copper from solution using 0.800 A for 20.0 min. Assume 100% current efficiency. Use and .
- Q56 · Original practice · 4 marksRedox and electrochemistryMolten aluminium oxide is electrolysed. Aluminium ions require three electrons per atom. A laboratory cell produces 2.70 g of Al at 5.00 A with 100% current efficiency. Use and .
- Q58 · Original practice · 4 marksRedox and electrochemistryVanadium(V) oxide, , is reduced to in acidic solution.
- Q87 · Original practice · 6 marksRedox and electrochemistry50.0 mL of 0.100 mol L⁻¹ AgNO₃ is mixed with 50.0 mL of 0.100 mol L⁻¹ NaCl at . AgCl precipitates. For AgCl, . After equilibrium, the liquid is completely separated from the solid. Use .
- Q89 · Original practice · 7 marksRedox and electrochemistryA copper-plating cell runs at 1.50 A for 32.0 min. It deposits 0.740 g Cu. All current not used for copper deposition produces hydrogen by . Use , and gas molar volume .
- Q93 · Original practice · 6 marksRedox and electrochemistryA 2.00 mL hydrogen peroxide sample reacts completely with 20.00 mL of 0.05000 mol L⁻¹ Fe²⁺ in excess acid. Peroxide is reduced according to while Fe²⁺ forms Fe³⁺. The remaining Fe²⁺ requires 10.00 mL of 0.01000 mol L⁻¹ permanganate. Each mole of permanganate reacts with five moles Fe²⁺.
- Q97 · Original practice · 7 marksRedox and electrochemistryA zinc–copper galvanic cell contains 50.0 mL of 0.100 mol L⁻¹ Cu²⁺ solution and excess zinc. In an ideal model, Cu²⁺ reduction is the only cathode reaction. The cell supplies a constant 0.200 A until all initial Cu²⁺ is consumed. Use , and .
- Q105 · Original practice · 1 markRedox and electrochemistryA cell potential calculated from standard reduction potentials differs from the potential measured for the same pair of half-cells. Which observation best explains the difference?
- Q106 · Original practice · 1 markRedox and electrochemistryThe table records whether a coating forms when each metal is placed in a solution of another metal’s ions. Which metal is the strongest reducing agent?
- Q107 · Original practice · 1 markRedox and electrochemistryThe reduction potentials are and . What is the standard potential for ?
- Q108 · Original practice · 1 markRedox and electrochemistryWhat is the correct name of ?
- Q133 · Original practice · 6 marksRedox and electrochemistryAn unknown metal M forms M²⁺ ions. A galvanic cell uses M/M²⁺ and Cu/Cu²⁺ half-cells under standard conditions. Electrons flow from M to Cu and the cell potential is 1.10 V. Use the supplied reduction potentials.