QCEVault

Redox and electrochemistry practice

QCE Chemistry · Original practice questions with worked solutions

All redox and electrochemistry practice questions

31 original questions · Page 2 of 2

  1. Q134 · Original practice · 4 marks
    A steel object is connected separately to either magnesium metal or copper metal in an electrolyte. Use the reduction potentials Mg²⁺/Mg = −2.37 V, Fe²⁺/Fe = −0.44 V and Cu²⁺/Cu = +0.34 V. Treat the steel as iron and compare which metal is more readily oxidised.
    Redox and electrochemistry
  2. Q135 · Original practice · 5 marks
    The diagram shows a standard hydrogen electrode connected to another half-cell. The electrode is platinum, the aqueous hydrogen-ion concentration is 1.0 mol L⁻¹, hydrogen pressure is 100 kPa and temperature is 25 °C.
    Redox and electrochemistry
  3. Q136 · Original practice · 6 marks
    Hydrogen peroxide decomposes by 2H2O2(aq)→2H2O(l)+O2(g)\mathrm{2H_2O_2(aq)\to2H_2O(l)+O_2(g)}. This can be represented by one oxidation half-equation and one reduction half-equation in acidic solution.
    Redox and electrochemistry
  4. Q137 · Original practice · 6 marks
    Two electrolytic cells are connected in series and therefore receive the same charge. Cell A deposits Ag from Ag⁺; cell B deposits Cu from Cu²⁺. A current of 0.500 A flows for 900 s. Cell A has 100% deposition efficiency. Cell B deposits 0.126 g Cu. Use F = 96485 C mol⁻¹, M(Ag) = 107.9 g mol⁻¹ and M(Cu) = 63.55 g mol⁻¹.
    Redox and electrochemistry
  5. Q138 · Original practice · 5 marks
    Cell A contains molten sodium bromide. Cell B contains a very dilute aqueous sodium nitrate solution. Both use inert electrodes. For cell B, assume that water reacts at both electrodes and the nitrate ions do not react.
    Redox and electrochemistry
  6. Q139 · Original practice · 5 marks
    A copper-plating cell uses an inert anode. The current is held constant during each interval in the table. Assume Cu²⁺ reduction at the cathode and oxygen formation from water at the anode, each with 100% current efficiency. Use F = 96485 C mol⁻¹, M(Cu) = 63.55 g mol⁻¹ and gas molar volume 24.8 L mol⁻¹.
    Redox and electrochemistry
  7. Q140 · Original practice · 7 marks
    A nickel coating is required on 40.0 cm² of a metal object. Its uniform thickness must be 50.0 μm. Assume only Ni²⁺ reduction occurs at the object and current efficiency is 100%. Use density(Ni) = 8.90 g cm⁻³, M(Ni) = 58.69 g mol⁻¹ and F = 96485 C mol⁻¹. The current is 2.00 A. A pure nickel anode is used.
    Redox and electrochemistry