Chemical synthesis practice
QCE Chemistry · Original practice questions with worked solutions
Practise reaction pathways, yields and evaluating chemical production. Distinguish theoretical material efficiency from the actual amount obtained.
Key ideas
- Write a balanced equation and identify the limiting reactant before calculating theoretical yield.
- Percentage yield is using consistent quantities.
- Evaluate a process using the stated criteria, such as waste, conditions, energy requirements and environmental effects.
Worked example
A common mistake
A high atom economy does not guarantee a high experimental yield or a low environmental impact.
Try these questions
Attempt each question before revealing the worked solution. Saved questions and checked answers also appear in the main bank on this device. Exam marks are recorded after marking a practice exam.
QUESTION 57 (5 marks)
a) Write the anode and cathode half-equations, using four electrons in each. [3 marks]
b) Show the overall equation after cancelling species. [1 marks]
c) Explain why the fuel cell can continue delivering current for longer than a sealed galvanic cell containing a fixed amount of reactants. [1 marks]
QUESTION 80 (5 marks)
a) Predict the change in equilibrium yield and explain. [2 marks]
b) Explain why the lower temperature may reduce ammonia production per hour despite the improved equilibrium yield. [2 marks]
c) State the catalyst’s effect on the equilibrium yield. [1 marks]
All chemical synthesis practice questions
13 original questions · Page 1 of 1
- Q29 · Original practice · 1 markChemical synthesis. A batch starts with 1.0 mol of nitrogen and 2.4 mol of hydrogen. The theoretical amount of ammonia is
- Q30 · Original practice · 1 markChemical synthesisIn an acidic hydrogen–oxygen fuel cell, which cathode half-equation is correct?
- Q57 · Original practice · 5 marksChemical synthesisA hydrogen–oxygen fuel cell operates in alkaline electrolyte.
- Q80 · Original practice · 5 marksChemical synthesisThe Haber reaction is , with . A designer considers lowering the operating temperature from 450 °C to 100 °C while keeping the pressure fixed.
- Q81 · Original practice · 6 marksChemical synthesisIn the contact process, . A feed contains 8.00 mol SO₂ and 3.00 mol O₂.
- Q82 · Original practice · 5 marksChemical synthesisA student reacts 0.300 mol ethanol with 0.200 mol ethanoic acid to make ethyl ethanoate. The isolated ester mass is 15.0 g. Use .
- Q83 · Original practice · 6 marksChemical synthesisA fermentation consumes 36.0 g glucose and produces 14.7 g ethanol. Use and .
- Q91 · Original practice · 6 marksChemical synthesisAn acidic hydrogen–oxygen fuel cell supplies 2.00 A for 1.00 h. Use and gas molar volume . Exactly 50.0% of the hydrogen fed into the cell reacts; assume all current comes from hydrogen oxidation.
- Q100 · Original practice · 10 marksChemical synthesisA miniature ammonia project generates hydrogen by electrolysis with a current of 2.00 A for 9648.5 s, at 100% efficiency. Hydrogen formation requires two electrons per molecule. The hydrogen then reacts with 0.0200 mol N₂ by . All ammonia produced is captured in 50.00 mL of 1.000 mol L⁻¹ HCl and the solution is made up to 100.0 mL.…
- Q117 · Original practice · 1 markChemical synthesisIn the contact process, sulfur trioxide is absorbed into concentrated sulfuric acid before water is added. Which equation represents the absorption step?
- Q118 · Original practice · 1 markChemical synthesisAn acidic hydrogen fuel cell consumes 0.0300 mol of oxygen. Assuming all of this oxygen forms water, how many moles of electrons pass through the external circuit?
- Q148 · Original practice · 5 marksChemical synthesisA synthesis must produce 2.50 g of ethyl butanoate at an expected isolated yield of 75.0%. Butanoic acid and ethanol react in a 1:1 ratio. Ethanol is supplied in excess. Use M(butanoic acid) = 88.1 g mol⁻¹ and M(ethyl butanoate) = 116.2 g mol⁻¹.
- Q155 · Original practice · 8 marksChemical synthesisAn ethanol plant compares two routes. Route F ferments 90.0 g of glucose at 80.0% ethanol yield, then recovers 90.0% of the ethanol formed. Route H hydrates 1.50 mol of ethene at 60.0% ethanol yield, then recovers 95.0% of the ethanol formed. Water is in excess. The fermentation enzymes lose catalytic activity when heated far above their operating range. Use…